[2025] New FCSS_SDW_AR-7.4 exam dumps Use Updated Fortinet Exam
Verified FCSS_SDW_AR-7.4 Dumps Q&As - FCSS_SDW_AR-7.4 Test Engine with Correct Answers
Fortinet FCSS_SDW_AR-7.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 24
Refer to the exhibits. The exhibits show the configuration for SD-WAN performance. SD-WAN rule, the application IDs of Facebook and YouTube along with the firewall policy configuration and the underlay zone status. Which two statements are true about the health and performance of SD-WAN members 3 and 4? (Choose two.)
- A. The performance is an average of the metrics measured for Facebook and YouTube traffic passing through the member.
- B. Only related TCP traffic is used for performance measurement.
- C. FortiGate identifies the member as dead when there is no Facebook and YouTube traffic passing through the member.
- D. Encrypted traffic is not used for the performance measurement.
Answer: A,B
NEW QUESTION # 25
Refer to the exhibits.
The exhibits show the configuration for SD-WAN performance. SD-WAN rule, the application IDs of Facebook and YouTube along with the firewall policy configuration and the underlay zone status.
Which two statements are true about the health and performance of SD-WAN members 3 and 4? (Choose two.)
- A. The performance is an average of the metrics measured for Facebook and YouTube traffic passing through the member.
- B. Only related TCP traffic is used for performance measurement.
- C. FortiGate identifies the member as dead when there is no Facebook and YouTube traffic passing through the member.
- D. Encrypted traffic is not used for the performance measurement.
Answer: A,B
NEW QUESTION # 26
Refer to the exhibit. An administrator configures SD-WAN rules for a DIA setup using the FortiGate GUI. The page to configure the source and destination part of the rule looks as shown in the exhibit. The GUI page shows no option to configure an application as the destination of the SD-WAN rule Why?
- A. You must enable the feature first using the GUI menu System > Feature Visibility.
- B. FortiGate allows the configuration of applications as the destination of SD-WAN rules only on the CLI.
- C. You cannot use applications as the destination when FortiGate is used for a DIA setup.
- D. You must enable the feature on the CLI.
Answer: C
NEW QUESTION # 27
Refer to the exhibit.An administrator checks the status of an SD-WAN topology using the FortiManager SD-WAN monitor menus. All members are configured with one or two SLAs. Which two conclusions can you draw from the output shown? (Choose two.)
- A. This SD-WAN topology contains only two branch devices.
- B. branch2_fgt establishes six tunnels to the hubs and they are all up.
- C. The template view should be used to see the hub devices.
- D. One member of branch2_fgt is missing the SLAs.
Answer: A,D
NEW QUESTION # 28
Refer to the exhibit. For your ZTP deployment, you review the CSV file shown in exhibit and note that it is missing important information. Which two elements must you change before you can import it into FortiManager? (Choose two.)
- A. You must define a name for each device
- B. You must define a value for each device and each metadata variable that defines an IP address.
- C. You must define a value for each device and each user-defined metadata variable.
- D. You must associate a device blueprint with each device
Answer: A,D
NEW QUESTION # 29
Refer to the exhibits.
You use FortiManager to configure SD-WAN on three branch devices.
When you install the device settings. FortiManager prompts you with the error "Copy Failed" for the device branch1_fat When you click the log button. FortiManager displays the message shown in the exhibit.
- A. Remove the installation target for the SD-WAN member port4. You cannot combine metadata variable and installation targets.
- B. Check the connection between branch1_fgt and FortiManager
- C. Gateways for all members in a zone must be defined the same way. Specify the gateway of the SD-WAN member port! without metadata variables.
- D. Check the metadata variable definitions, and review the per-device mapping configuration.
- E. Based on the exhibits, which statement best describes the issue and how you can resolve it?
Answer: E
NEW QUESTION # 30
Exhibit.
For your ZTP deployment, you review the CSV file shown in exhibit and note that it is missing important information. Which two elements must you change before you can import it into FortiManager? (Choose two.)
- A. You must define a name for each device
- B. You must define a value for each device and each metadata variable that defines an IP address.
- C. You must define a value for each device and each user-defined metadata variable.
- D. You must associate a device blueprint with each device
Answer: A,D
NEW QUESTION # 31
Exhibit.
Refer to the exhibit, which shows the SD-WAN rule status and configuration.
Based on the exhibit, which change in the measured packet loss will make HUB1-VPN3 the new preferred member?
- A. When all three members have the same packet loss
- B. When HUB1-VPN1 has 4% packet loss
- C. When HUB1-VPN1 has 12% packet loss
- D. When HUB1-VPN3 has 4% packet loss
Answer: A
NEW QUESTION # 32
Which two statements correctly describe what happens when traffic matches the implicit SD-WAN rule? (Choose two.)
- A. Traffic does not match any of the entries in the policy route table.
- B. The session information output displays no SD-WAN service id.
- C. FortiGate flags the session with may_dirty and vwl_def ault.
- D. Traffic is load balanced using the algorithm set for the v4-ecmp-mode setting.
- E. The traffic is distributed, regardless of weight, through all available static routes.
Answer: A,B
NEW QUESTION # 33
The SD-WAN overlay template helps to prepare SD-WAN deployments. To complete the tasks performed by the SD-WAN overlay template, the administrator must perform some post-run tasks. What are two mandatory post-run tasks that must be performed? (Choose two.)
- A. Assign a hub id metadata variable to each hub device.
- B. Create policy packages and assign them to the branch devices.
- C. Configure routing through the overlay tunnels created by the SD-WAN overlay template.
- D. Configure SD-WAN rules
- E. Assign an sdwan_id metadata variable to each device (branch and hub)
Answer: B,D
NEW QUESTION # 34
Refer to the exhibit.
Which SD-WAN rule and interface uses FortiGate to steer the traffic from the LAN subnet 10.0.1.0/24 to the corporate server 10.2.5.254?
- A. SD-WAN service rule 4 and port1 or port2.
- B. SD-WAN service rule 3 and interface HUB1-VPN2.
- C. SD-WAN service rule 4 and interface port2.
- D. SD-WAN service rule 3 and interface HUB1-VPN3.
Answer: D
NEW QUESTION # 35
Refer to the exhibit, which shows output of the command diagnose sys sdwan health-check status collected on a FortiGate device.
Which two statements are correct about the health check status on this FortiGate device?
(Choose two.)
- A. The health-check VPN_PING orders the members according to the measured jitter.
- B. The interface T_INET_0 missed three SLA targets.
- C. There is no SLA criteria configured for the health-check Level3_DNS.
- D. The interface T_INET_1 missed one SLA target.
Answer: C,D
NEW QUESTION # 36
Refer to the exhibits. You use FortiManager to configure SD-WAN on three branch devices.
When you install the device settings. FortiManager prompts you with the error "Copy Failed" for the device branch1_fat When you click the log button. FortiManager displays the message shown in the exhibit.
Based on the exhibits, which statement best describes the issue and how you can resolve it?
- A. Check the connection between branch1_fgt and FortiManager
- B. Remove the installation target for the SD-WAN member port4. You cannot combine metadata variable and installation targets.
- C. Gateways for all members in a zone must be defined the same way. Specify the gateway of the SD- WAN member port! without metadata variables.
- D. Check the metadata variable definitions, and review the per-device mapping configuration.
Answer: B
NEW QUESTION # 37
Refer to the exhibit.
The exhibit shows output of the command diagnose sys adwan aervice4 collected on a FortiGate device.
The administrator wants to know through which interface FortiGate will steer traffic from local users on subnet 10.0.1.0/255.255.255.192 and with a destination of the social media application Facebook.
Based on the exhibits, which two statements are correct? (Choose two.)
- A. When FortiGate cannot recognize the application of the flow, it steers the traffic through the preferred member of rule 3, HQ_T1.
- B. There is no service defined for the Facebook application, so FortiGate appliesservice rule 3 and directs the traffic to headquarters.
- C. FortiGate steers traffic for social media applications according to the service rule 2 and steers traffic through port2.
- D. When FortiGate cannot recognize the application of the flow, it load balances the traffic through the tunnels HQ_T1. HQ_T2. HQ_T3.
Answer: C,D
NEW QUESTION # 38
Refer to the exhibit. The exhibit shows output of the command diagnose sys adwan aervice4 collected on a FortiGate device.
The administrator wants to know through which interface FortiGate will steer traffic from local users on subnet 10.0.1.0/255.255.255.192 and with a destination of the social media application Facebook. Based on the exhibits, which two statements are correct? (Choose two.)
- A. When FortiGate cannot recognize the application of the flow, it steers the traffic through the preferred member of rule 3, HQ_T1.
- B. There is no service defined for the Facebook application, so FortiGate appliesservice rule 3 and directs the traffic to headquarters.
- C. When FortiGate cannot recognize the application of the flow, it load balances the traffic through the tunnels HQ_T1, HQ_T2, HQ_T3.
- D. FortiGate steers traffic for social media applications according to the service rule 2 and steers traffic through port2.
Answer: C,D
NEW QUESTION # 39
Refer to the exhibit that shows event logs on FortiGate. Based on the output shown in the exhibit, what can you say about the tunnels on this device?
- A. The VPN tunnel HUB1-VPN1_0 is a shortcut tunnel.
- B. The device steers voice traffic through the VPN tunnel HUB1-VPN3.
- C. There is one shortcut tunnel built from master tunnel VPN4.
- D. The master tunnel HU82-VPN3 cannot accept ADVPN shortcuts.
Answer: B
NEW QUESTION # 40
An administrator is configuring SD-WAN to load balance their network traffic. Which two things should they consider when setting up SD-WAN? (Choose two.)
- A. You can select the outbandwidth hash mode with all strategies that allow load balancing.
- B. Only the manual and best-quality strategies allow SD-WAN load balancing.
- C. When applicable. FortiGate load balances the traffic through all members that meet the SLA target.
- D. SD-WAN load balancing is possible only using the best quality and lowest cost (SLA) strategies.
Answer: A,D
NEW QUESTION # 41
Refer to the exhibit.Two hub-and-spoke groups are connected through redundant site-to-site IPsec VPNs between Hub 1 and Hub 2.
Which two configuration settings are required for the spoke A1 to establish an ADVPN shortcut with the spoke B2? (Choose two.)
- A. On hubs, auto-discovery-receiver must be enabled on the IPsec VPNs to spokes.
- B. On hubs, auto-diacovery-sender must be enabled on the IPsec VPNs to spokes
- C. On hubs, auto-discovery-forwarder must be enabled on the IPsec VPNs to hubs.
- D. On hubs, auto-discovery-forwarder must be enabled on the IPsec VPNs to spokes.
Answer: B,C
NEW QUESTION # 42
You are planning a new SD-WAN deployment with the following criteria:
- Two regions
- Most of the traffic is expected to remain within its region
- No requirement for inter-region ADVPN
To remain within the recommended best practices, which routing protocol should you select for the overlays?
- A. IBGP within each region and between the regions.
- B. OSPF for the routing within each region and EBGP between the regions.
- C. IBGP with BGP per overlays within each region and IBGP with BGP on loopback between the regions.
- D. IBGP with BGP on loopback within each region and EBGP between the regions.
Answer: D
NEW QUESTION # 43
Within the context of SD-WAN, what does SIA correspond to?
- A. Remote Breakout
- B. Local Breakout
- C. Secure Internet Authorization
- D. Software Internet Access
Answer: A
NEW QUESTION # 44
When a customer delegate the installation and management of its SD-WAN infrastructure to an MSSP, the MSSP usually keeps the hub within its infrastructure for ease of management and to share costly resources.
In which two situations will the MSSP install the hub in customer premises? (Choose two.)
- A. The customer expects a large amount of VoIP traffic.
- B. The customer requires SIA with centralized breakout.
- C. The administrator expects a large volume of traffic between the branches.
- D. The majority of the branch traffic is directed to a corporate data center.
Answer: B,C
NEW QUESTION # 45
......
Pass Your FCSS_SDW_AR-7.4 Dumps as PDF Updated on 2025 With 51 Questions: https://www.updatedumps.com/Fortinet/FCSS_SDW_AR-7.4-updated-exam-dumps.html
Fortinet FCSS_SDW_AR-7.4 Real Exam Questions and Answers FREE: https://drive.google.com/open?id=1j1ZNfejBk0mdQJicAE1nhYr2uoYwj7qv