Pass HPE6-A72 Exam with Updated HPE6-A72 Exam Dumps PDF 2022 [Q33-Q52]

Share

Pass HPE6-A72 Exam with Updated HPE6-A72 Exam Dumps PDF 2022

HPE6-A72 Exam Dumps - Free Demo & 365 Day Updates


Understanding functional and technical aspects of Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam Access Control Policy

The following will be discussed in HP HPE6-A72 dumps:

  • Explain how to set up an email notification when a status alert is generated
  • Explain how HPE OneView collects and displays utilization data
  • VLAN advantages
  • VLAN origin
  • Explain how to back up and restore an HPE OneView appliance
  • Broadcast domains
  • Authorizing interfaces
  • Explain how to access predefined reports about environment statusin OneView
  • ARP table
  • Identify and describe the common management and automation solution building blocksincluding, Security, - Monitoring, Image Repository, Config Mgmt
  • Describe the ERM topology configuration process
  • TCP Header – Port Numbers
  • IPv4
  • Sequence Numbers
  • Table of MAC addresses
  • Power over Ethernet
  • Port segregation & numbering
  • Describe the details of Hewlett Packard Enterprise (HPE) OneView licensing and licensing-problemscenarios
  • All the Networking devices: Switches, Routers, Multilayer Switches, APs, Mobility Controllers, Firewalls, Servers etc
  • Entering Aruba OS-CX
  • TCP Header
  • Describe the processfor addresses and identifiers
  • List optionsfor HPE OneView product support
  • UPD
  • Switchports vs. Routed ports
  • Introduction to ArubaOS-CX and characteristic set
  • Internet Control Message Protocol and reachability testing tools
  • Link Layer Discovery Protocol
  • Part 1 of Packet Delivery
  • Immediate levels & navigation
  • Describe how the HPE OneView Environmental Resource Manager (ERM) isintegrated into the data center
  • Context-sensitive aid
  • Describe the key resource health monitoring operations of Hewlett Packard Enterprise (HPE) OneView
  • Switching Portfolio (ArubaOS switches & ArubaOS-CX switches) is this introducing both portfolios on a pair of slides and some slides on ArubaOS-CX hardware architecture, and software architecture
  • Outline the benefits of the composer over virtual appliance
  • 2-Tier versus 3-Tier ranking
  • Play logs, version, interfaces, transceivers, configuration
  • Summary
  • Outline the environmentsthe virtual appliance can be hosted in
  • Three-way Handshake
  • DHCP server arrangement in switches
  • Frames of Ethernet

What is the cost of Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam

  • Duration of Exam: 3 days
  • Type of Questions: Multiple choice (MCQs), multiple answers.
  • Language of Exam: English
  • Number of Questions: 30
  • No negative marking for wrong answers
  • Expiration: 2 years
  • Lab Required: Yes

 

NEW QUESTION 33
Match each network protocol to the correct server listening port. Not all answers will be used.

Answer:

Explanation:

 

NEW QUESTION 34
What is the Link Layer Discovery Protocol?

  • A. a discovery protocol used between Layer 3 devices to determine routes within a single autonomous system
  • B. a standardized IPv6 neighbor discovery protocol used to replace the ARP and broadcast mechanism used in IPv4
  • C. an Aruba proprietary discovery protocol supported in all Aruba switches along with Cisco Discovery Protocol or CDP
  • D. a standardized protocol for communicating directly-connected device information and capabilities.

Answer: D

 

NEW QUESTION 35
What connectivity commands are available on AOS-CX switches? (Choose two.)

  • A. ping
  • B. traceroute
  • C. tracert
  • D. netstatus
  • E. pathping

Answer: A,B

 

NEW QUESTION 36
Which switches support Aruba Virtual Switching Extension (VSX)? (Choose two.)

  • A. Aruba 2930F
  • B. Aruba 6405
  • C. Aruba 8400
  • D. Aruba 8350
  • E. Aruba 5406R

Answer: B,C

 

NEW QUESTION 37
What are two OSPF attributes within the hello messages that must match to successfully establish neighbor relationships? (Choose two.)

  • A. Area ID
  • B. Process ID
  • C. Priority
  • D. Hello and Dead intervals
  • E. Router ID

Answer: A,D

 

NEW QUESTION 38
Refer to the exhibit.

The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?

  • A. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.
  • B. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
  • C. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.
  • D. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.

Answer: A

 

NEW QUESTION 39
Refer to the exhibit.

The above output is the result of issuing the command show system resource-utilization.
What command should be used to enable terminal output line by line or page by page?

  • A. The command page
  • B. The command less
  • C. The command terminal length 30
  • D. The command more

Answer: A

 

NEW QUESTION 40
Click on the colored box that corresponds with the line that best represents Broadcast traffic flow.

Answer:

Explanation:

 

NEW QUESTION 41
Refer to the exhibit

What is true regarding VLAN 50 according to the diagram above?

  • A. Since VLAN 50 has not been assigned to any enabled physical port, the status is down.
  • B. VLAN 50 was never added to the vlan-database and therefore is in a down state.
  • C. VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down.
  • D. VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces.

Answer: A

 

NEW QUESTION 42
Refer to the exhibit.

You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?

  • A. Access-2# configure
    Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
  • B. Access-2# configure
    Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
  • C. Access-2# configure
    Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
  • D. Access-2# configure
    Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

Answer: B

 

NEW QUESTION 43
SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?

  • A. Option D
  • B. Option B
  • C. Option A
  • D. Option C

Answer: A

 

NEW QUESTION 44
Which two port characteristics must match between LAG interfaces? (Choose two.)

  • A. Media type
  • B. Chassis number
  • C. Member ID
  • D. Duplex
  • E. Port number

Answer: A,D

 

NEW QUESTION 45
Which security benefit does SNMPv3 offer that SNMPv2 does not offer?

  • A. SSL encryption
  • B. Data confidentially
  • C. Scopes
  • D. RADIUS groups

Answer: B

 

NEW QUESTION 46
Which statement is correct regarding powering an Aruba Access Point?

  • A. Using switchports for this reason is unnecessary, because Aruba Access Points typically use an AC to DC power adapter to draw power.
  • B. PoE or PoE+ is only used with Ethernet that is carried over multi-mode fiber cabling.
  • C. Most administrators use PoE or PoE+ enabled switchports to provide both Ethernet connectivity and power to the AP.
  • D. PoE or PoE+ enabled switchports are rarely used given concerns about causing electrical interference, with the data also carried over Ethernet cabling.

Answer: C

 

NEW QUESTION 47
What is the binary conversion of the hexadecimal value 0x2001?

  • A. 0010 0001
  • B. 0011 0000 0000 0001
  • C. 0010 0000 0000 0001
  • D. 0002 0000 0000 0001

Answer: C

 

NEW QUESTION 48
Match the term to the correct description.

Answer:

Explanation:

 

NEW QUESTION 49
Which network category applies to a SOHO internal network?

  • A. Internet
  • B. WAN
  • C. SD-WAN
  • D. LAN

Answer: A

 

NEW QUESTION 50
Your customer has 349 users in a two-story building.
What are two benefits of a 2-Tier design? (Choose two.)

  • A. Support for WAN/MPLS, Internet, and Data Center directly on the Collapsed core.
  • B. Use of layer 2 switches at the access layer can process and route traffic from attached APs.
  • C. Improved performance by offloading processing from the Access layer to the Core.
  • D. Layer 2 and Layer 3 protocols run close to the endpoints to better implement ACL and QoS policy at the edge.
  • E. Provides a more cost effective solution given that no additional switches are required for a third tier.

Answer: D,E

 

NEW QUESTION 51
Click on the colored box that corresponds with the line that best represents Unicast traffic flow.

Answer:

Explanation:

 

NEW QUESTION 52
......


Understanding functional and technical aspects of Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam Design for Spanning Tree Protocol

The following will be discussed in HP HPE6-A72 dumps:

  • Excessive network
  • Part 2 Packet Transmission
  • 802.1w summary
  • Explain how to manage firmware with HPE OneView
  • Explain how to add, configure, and manage storage systemsin HPE OneView
  • Classless inter-domain routing
  • Routing of Inter-VLAN
  • Describe Hewlett Packard Enterprise (HPE) OneView managed device support for HPE Synergy, HPE BladeSystem, and HPE ProLiant servers
  • Interior Gateway Protocol vs Exterior Gateway Protocol
  • Utilizing cost to manage routes
  • Inactive routes
  • IP Routing - Section 2
  • Coordination
  • 802.1w domain arrangement
  • Distance Vector vs Link State
  • Overview
  • Load Balancing
  • Designated Router and Backup Designated Router
  • DHCP Internet Protocol Helper Address
  • Administrative Distance
  • Adding and configuring devices under management in HPE OneView
  • Fundamental operation
  • Need for third layer redundancy.
  • Latent interfaces
  • L2 loops
  • Link Aggregation Control Protocol
  • Link State Database
  • Static Aggregate
  • Describe the processto configure networksin HPE OneView
  • Load balancing
  • OSPF Router-ID and Hello Messages
  • Similar Spanning Tree
  • Route preference and convergence
  • Preempt
  • Scalability problems
  • Intro to Variable refrigerant flow
  • VRRP
  • IP Routing Service
  • Explain how to manage and configure facilitiesinfrastructure (racks, PDUs, etc)
  • Floating routes
  • Standard Gateway

 

HPE6-A72 Dumps - Pass Your Certification Exam: https://www.updatedumps.com/HP/HPE6-A72-updated-exam-dumps.html

Free Sales Ending Soon - Use Real  HPE6-A72 PDF Questions: https://drive.google.com/open?id=1_CbpvLFCop1VDtu9Jfozg0eqUNJUfMEv