Real EMC DES-3128 Exam Questions [Updated 2023]
DES-3128 Exam Dumps Pass with Updated 2023 Specialist - Implementation Engineer, NetWorker Exam
NEW QUESTION # 26
What is a part of a full backup in a Windows BMR recovery operation?
- A. Windows Roles
- B. Critical volumes
- C. UEFI Partitions
- D. Windows File System
Answer: B
Explanation:
A part of a full backup in a Windows BMR recovery operation is the critical volumes, which are the drives containing the Windows operating system, boot loader, and related system files. This is required to ensure that the system is able to boot after the recovery process is complete.
NEW QUESTION # 27
Which URL syntax is correct for NWUI?
- A. https //servemame 9090/nwui
- B. https//servemame 9090
- C. https//servemame 9090/webui
- D. https//servemame 9090/ui
Answer: C
Explanation:
NWUI, or NetWorker User Interface, is a web-based graphical user interface for NetWorker. The URL syntax for NWUI is https://servername:9090/webui, where "servername" is the name of the NetWorker server.
NEW QUESTION # 28
An administrator wants to use block-based backups on a Windows client. They have already installed the NetWorker client software package on the system Which statement describes the need for an additional NetWorker package to enable Block-based Backup support?
- A. Logical Volume Manager is required.
- B. NetWorker Extended Client software is required.
- C. NetWorker Block-based Backup software is required.
- D. No additional software is required.
Answer: B
Explanation:
To enable Block-based Backup support on a Windows client, the NetWorker Extended Client software package must be installed in addition to the NetWorker Client software package.
NEW QUESTION # 29
What is staging used for?
- A. move data to a different storage device
- B. keep both copies online at all times
- C. maintain a longer retention period
- D. make and keep a second copy at all times
Answer: A
NEW QUESTION # 30
An administrator wants to create a client "ABO" to back up alt critical volumes for disaster recovery. They want the backup utility to scan a volume or a disk m a file system and back up all the blocks that are in use in the file system Also, the user has a feature that allows for a single high-density file system to be spirt into multiple concurrent save sets to speed up the backup walk process. The client must send 6 save sets simultaneously in a backup.
Use the simulator to perform the task
When you have finished, continue to the next question.
Answer:
Explanation:
The steps to create a client "ABO" to back up critical volumes for disaster recovery and to use the feature that allows for a single high-density file system to be split into multiple concurrent save sets are as follows:
Create the client:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Click on the Add button.
In the Client Name field, enter "ABO".
In the Client Address field, enter the IP address or hostname of the client.
In the Platform field, select the appropriate platform for the client.
Click on the OK button to create the client.
Configure the client:
Go to the Clients tab.
Click on the ABO client.
Go to the File Systems tab.
Click on the Add button.
In the File System field, enter the path of the critical volume that needs to be backed up.
In the Save Set field, enter a name for the save set.
Check the Include all blocks that are in use option. This will ensure that all blocks that are in use in the file system are backed up.
Click on the OK button to add the file system.
Configure the save set:
Go to the Clients tab.
Click on the ABO client.
Go to the Save Sets tab.
Click on the save set that you just created.
Go to the Advanced tab.
In the Save Set Options field, enter "PSS:streams_per_ss=6". This tells NetWorker to split the save set into 6 concurrent save sets and send them simultaneously in a backup.
Click on the OK button to save the changes.
Schedule the backup:
Go to the Clients tab.
Click on the ABO client.
Go to the Schedules tab.
Click on the Add button.
Select the appropriate schedule for the backup.
In the Save Set field, select the save set that you just created.
Click on the OK button to schedule the backup.
NEW QUESTION # 31
Which event category indicates that a nonfatal error has occurred?
- A. Information
- B. Alert
- C. Warning
- D. Notification
Answer: C
Explanation:
A Warning event category indicates that a nonfatal error has occurred. The other options are not related to this process.
NEW QUESTION # 32
A customer asked an administrator to configure Active Directory (AD) granular level backups A backup administrator discovered that the AD Domain distinguished name is CN=company,CN=local What should be entered in the Save Sets attribute for the Domain Controller client to back up the Active Directory?
- A. APPLICATIONS/AD/CN=company,CN=local
- B. AD:CN=company.CN=local
- C. CN=companyCN=local
Answer: A
Explanation:
n order to back up the Active Directory at a granular level, the Save Sets attribute for the Domain Controller client should be set to APPLICATIONS/AD/CN=company,CN=local. This will ensure that all the necessary data for the Active Directory is backed up.
NEW QUESTION # 33
An administrator already added a client "CLientA" This client has recently been assigned a second DNS named "ClientAB" When the backup ran, the following error is observed
"The client ClientAB is not in backup servers' clients list."
Use the simulator to resolve this issue
When you have finished, continue to the next question
Answer:
Explanation:
The steps to resolve the issue of the client "ClientAB" not being in the backup server's clients list are as follows:
Verify the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Verify that the client "ClientA" is present in the list of clients.
Verify that the client "ClientAB" is not present in the list of clients.
Update the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Click on the ClientA.
In the Client Name field, update the name to "ClientAB"
In the Client Address field, enter the IP address or hostname of the client.
Click on the OK button to save the changes.
Re-schedule the backup
Go to the Clients tab.
Click on the ClientAB.
Go to the Schedules tab.
Remove the current schedule and create a new schedule for the client.
Select the appropriate schedule for the backup.
In the Save Set field, select the save set that you need to backup.
Click on the OK button to schedule the backup.
Monitor the backup process
Monitor the backup process to ensure that it is running successfully.
Check the logs for any errors.
NEW QUESTION # 34
A backup administrator has configured the backup of the All save set on a Linux host that contains a remote mount point. During the restore, the administrator did not see the mount point data but only local data What is the reason for this behavior?
- A. The save command did not include the -x option.
- B. NetWorker does not support Linux mount point backup.
- C. Mount point backups require the extended client
- D. The save command did not include the -X option.
Answer: B
Explanation:
NetWorker does not directly support the backup of mount points on Linux systems. To back up the data on the mount points, the remote systems must be added as a client to the NetWorker server and included in the backup.
NEW QUESTION # 35
A NetWorker workflow is configured as a probe-based backup
What actions must be included in the workflow?
- A. internal and metadata validation
- B. probe and backup actions
- C. check connectivity and probe actions
- D. clone and probe and action only
Answer: C
NEW QUESTION # 36
A NetWorker server has a media library attached. A backup administrator has started a workflow and noticed that the Waiting for 1 writable volume(s) to pool alert appeared. There are some unlabeled media in the library, but NetWorker doesn't label them automatically.
What is the cause of this behavior?
- A. A Recycle to other pools attribute on the pool properties is disabled.
- B. An Auto media management attribute in tape properties is disabled.
- C. A Recycle from other pools attribute on the pool properties is disabled.
- D. An Auto media management attribute in library properties is disabled.
Answer: B
NEW QUESTION # 37
What is the minimum number of served licenses required for a customer with 5 datazones and 2 additional storage nodes per datazone?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 38
Which command can be used to query the NetWorker media database and to export the fields as comma separated fields?
- A. mminfo -csv
- B. mminfo -avot
- C. mminfo -xc,
- D. mminfo -m
Answer: B
Explanation:
The mminfo command can be used to query the NetWorker media database and to export the fields as comma separated fields. The -avot flag will list all volumes and export the fields as a comma separated list.
NEW QUESTION # 39
A backup administrator has installed a NetWorker Server on a Windows 2019 host. The installation finished successfully. When the NMC Launcher started and the backup server's name is specified as the NMC server, the following error is observed.
Unable to connect the NMC server
The administrator determined the NMC was not installed. What is the recommended action to resolve the issue?
- A. Open a service request with Dell Technologies.
- B. Run the lgtonmc-[version].exe installation executables.
- C. Run the lgtoxtdcint-fversionJ.exe installation executable.
- D. Rerun the installation and enable the NMC option.
Answer: A
NEW QUESTION # 40
A backup administrator has configured the backup of the All save set on a Linux host that contains a remote mount point. During the restore, the administrator did not see the mount point data but only local data What is the reason for this behavior?
- A. NetWorker does not support Linux mount point backup.
- B. The save command did not include the -x option.
- C. Mount point backups require the extended client
- D. The save command did not include the -X option.
Answer: B
NEW QUESTION # 41
An administrator is performing a directed recover to a Microsoft Windows cluster environment.
What is the role of the client that initiated the recovery?
- A. Administering client
- B. NMC client
- C. Destination client
- D. Source client
Answer: D
Explanation:
The client that initiated the directed recover is known as the source client. This client is responsible for sending the data to the destination client. The destination client is the one that will receive the data from the source client, and the administering client is the one that initiates the recover process. The NMC client is used for monitoring the recover process.
NEW QUESTION # 42
A backup administrator has configured Dell EMC Cloud Tier and the NetWorker data movement policy for long-term retention. The save sets are not moved to the Cloud even though cloning ran successfully What is the reason for this issue?
- A. Data movement policy on PowerProtect DD was not running yet
- B. Missing replication license on PowerProtect DD
- C. Data movement will occur only one time per month
- D. User does not have the Cloud Tier privilege
Answer: C
Explanation:
The data movement policy on Dell EMC Cloud Tier is configured to move the save sets to the Cloud only once a month. The cloning of the save sets may have run successfully, but the data movement will still only occur once a month.
NEW QUESTION # 43
How should a backup administrator install a virtual CloudBoost appliance on a VMware ESXi host?
- A. Invoke the VMware Update Manager to download the installation package.
- B. Deploy an OVF template.
- C. Copy a zipped installation package to a Linux VM, and run the setup script
- D. Run an executable installation package
Answer: B
Explanation:
To install a virtual CloudBoost appliance on a VMware ESXi host, the backup administrator must deploy an OVF template. This will deploy the appliance on the ESXi host and configure the settings for the appliance.
NEW QUESTION # 44
Refer to the exhibit.
An administrator asks about the clone flag on the Cloud. What does the T flag represent?
- A. Save set will be terminated at the cloud provider
- B. Save set exists only on a Cloud Tier device
- C. Save set will be cloned to a tape device
- D. Save set exists only on the cloud storage
Answer: B
NEW QUESTION # 45
When deploying a new CloudBoost appliance, which command must be run to enable remote client mounts?
- A. remote-mount-password
- B. passwd
- C. diagnostics
- D. nsrsnmd
Answer: A
NEW QUESTION # 46
Which monitoring tool is used to view current device operations, active sessions, messages concerning recent activity, and any pending messages?
- A. nsradmin
- B. Networker WebUser Interface
- C. NetWorker Character-Based Interface
- D. nsrwatch
Answer: D
Explanation:
Nsrwatch is a monitoring tool used to view current device operations, active sessions, messages concerning recent activity, and any pending messages. Nsrwatch can be used to monitor all services related to NetWorker. The other options are not related to this tool.
NEW QUESTION # 47
When deploying a new CloudBoost appliance, which command must be run to enable remote client mounts?
- A. remote-mount-password
- B. passwd
- C. diagnostics
- D. nsrsnmd
Answer: A
Explanation:
When deploying a new CloudBoost appliance, the remote-mount-password command must be run to enable remote client mounts.
NEW QUESTION # 48
A NetWorker server has a PowerProtect DDVE attached It is running out of space, and a customer needs to offload some data to AWS S3 What is the recommended way to perform this?
- A. Deploy a NetWorker storage node in AWS.
- B. Deploy a NetWorker storage node in AWS.
- C. Utilize a Dell EMC Cloud Tier feature.
- D. Manually copy data to AWS S3
Answer: D
NEW QUESTION # 49
......
DES-3128 Exam Dumps, DES-3128 Practice Test Questions: https://www.updatedumps.com/EMC/DES-3128-updated-exam-dumps.html
Free DES-3128 Exam Dumps to Pass Exam Easily: https://drive.google.com/open?id=1tF0XBrnesVFnNpDL4Fooei5sfM9oCesz