Get Prepared for Your OGBA-101 Exam With Actual The Open Group Study Guide!
Pass Your Next OGBA-101 Certification Exam Easily & Hassle Free
NEW QUESTION # 63
Complete the sentence. The four dimensions used to scope an architecture are:
- A. Strategy, Portfolio, Project, Solution Delivery
- B. Business, Data, Application, Technology
- C. Breadth, Depth, Time Period, Architecture Domains
- D. Strategy, Segment, Capability, Budget
Answer: C
Explanation:
In TOGAF, the dimensions for scoping an architecture are Breadth (coverage across the organization), Depth (level of detail), Time Period (horizon of the architecture), and Architecture Domains (the four architecture domains of Business, Data, Application, and Technology). These dimensions ensure comprehensive scoping and contextual alignment.
References: TOGAF Standard, Chapter on Scoping the Architecture.
According to TOGAF, defining the scope of an architecture involves considering these four key dimensions:
* Breadth:This refers to how much of the enterprise is covered by the architecture. It defines the boundaries of the architecture, which could range from a single department to the entire organization, or even extending to external partners.
* Depth:This dimension determines the level of detail included in the architecture. It can range from high- level conceptual models to detailed specifications of individual components.
* Time Period:This specifies the timeframe for the architecture, including the intended lifespan of the architecture and any planned phases or iterations. It addresses questions like "What is the architecture for now?" and "What should the architecture look like in the future?"
* Architecture Domains:This dimension defines which of the four architecture domains (Business, Data, Application, Technology) are included in the scope. The selection of domains depends on the specific needs and objectives of the architecture development effort.
NEW QUESTION # 64
Consider the following modeling example, relating business capabilities to organization units so as to highlight duplication and redundancy:
(Note in this example the cells colored green, yellow, and red, are also marked G. Y, and R, respectively) Which of the following best describes this technique?
- A. Gap Analysis
- B. Perspective Analysis
- C. Relationship Mapping
- D. Capability Mapping
Answer: C
Explanation:
The technique shown in the example is called relationship mapping. It is a technique that can be used to show how a business architecture addresses stakeholder concerns across different parts of an organization2. It can highlight gaps or overlaps in the coverage of stakeholder concerns by a business architecture. In this case, the technique is used to relate business capabilities to organization units so as to highlight duplication and redundancy.
NEW QUESTION # 65
Which of the following is a benefit of developing a TOGAF business scenario?
- A. It provides a versatile approach to business planning.
- B. It provides general rules and guidelines to support planning at the enterprise level.
- C. It provides an organizing framework for the change activity in a project.
- D. It can be an important aid to vendors in delivering appropriate solutions.
Answer: D
Explanation:
Developing a TOGAF business scenario provides several benefits, particularly in aiding vendors to deliver appropriate solutions. Here's a detailed explanation:
* TOGAF Business Scenarios:
* Business scenarios are used to capture and describe business requirements, helping to identify and understand business needs and challenges.
* Role in Vendor Engagement:
* Clarity of Requirements: Business scenarios provide clear and detailed descriptions of the business context, needs, and requirements. This helps vendors understand what solutions are necessary to address specific business challenges.
* Alignment of Solutions: By providing a comprehensive view of the business environment and requirements, business scenarios ensure that the solutions proposed by vendors are aligned with the actual business needs and strategic goals.
* TOGAF ADM References:
* Phase A: Architecture Vision: In this phase, business scenarios are developed to capture stakeholder concerns and requirements, providing a basis for the architecture vision.
* Vendor Communication: Business scenarios are communicated to vendors to ensure that their solutions fit within the overall architecture and meet the specific requirements of the business.
* Benefits:
* Effective Solution Design: Vendors can design solutions that are tailored to the specific needs of the business, reducing the risk of misalignment and ensuring better outcomes.
* Improved Collaboration: Business scenarios facilitate better collaboration between the enterprise and vendors by providing a common understanding of the requirements and expected outcomes.
In summary, developing a TOGAF business scenario aids vendors in delivering appropriate solutions by providing clear and detailed descriptions of business requirements, ensuring alignment with business needs and strategic goals.
NEW QUESTION # 66
Which of the following is a derived relationship in an organization map?
- A. Value flow
- B. Location
- C. Scope of enterprise
- D. Capability
Answer: A
Explanation:
According to the TOGAF Series Guide: Organization Mapping, one of the derived relationships in an organization map is value flow1. A value flow is a relationship that shows how value is exchanged between business units or other entities in an organization map1. A value flow can be expressed as a verb phrase that indicates what type of value is transferred or shared between entities1. For example, in an organization map for an online retailer, a possible value flow could be "Delivers products" between the Warehouse business unit and the Customer entity.
https://pubs.opengroup.org/togaf-standard/business-architecture/organization-mapping.html
NEW QUESTION # 67
Which approach to model, measure, and analyze business value is primarily concerned with identifying the participants involved in creating and delivering value?
- A. Lean value streams
- B. Value streams
- C. Value networks
- D. Value chains
Answer: C
Explanation:
Value networks are an approach to model, measure, and analyze business value that is primarily concerned with identifying the participants involved in creating and delivering value3. Value networks focus on the relationships and interactions among the participants, such as customers, suppliers, partners, employees, and other stakeholders3. Value networks can help to understand how value flows through the network and how it can be improved or optimized.
Value networks emphasize the interconnectedness of various entities involved in creating and delivering value. This approach goes beyond the linear view of a value chain and recognizes the complex relationships and interactions between:
* Internal participants:Different departments, teams, and individuals within the organization.
* External participants:Suppliers, partners, customers, and other stakeholders outside the organization.
By identifying and analyzing these participants, value networks help to:
* Understand the ecosystem:Gain a holistic view of how value is created and delivered within a broader network of relationships.
* Identify key dependencies:Recognize how different participants rely on each other and how their actions affect the overall value creation process.
* Optimize collaboration:Improve coordination and collaboration between participants to enhance efficiency and value delivery.
* Identify potential risks and opportunities:Assess the impact of changes or disruptions within the network on value creation
NEW QUESTION # 68
Consider the following business capability map. where cells of a model are given different colors to represent desired maturity levels (Green (G) = level achieved, yellow (Y) = one level away, red (R) =two or more levels away, purple (P) = missing capability):
Which of the following best describes what this shows?
- A. Policy Management. Government Relations Management, and HR Management need immediate attention. Partner Management. Account Management, and Training Management have issues but are of lower priority Agent Management Is a new business capability that does not exist
- B. The Strategic capabilities need more attention in two areas. Policy Management, and Government Relations Management. Agent Management is missing as a Core capability Information Management needs attention as a Supporting Capability.
- C. Agent Management needs immediate attention. Market Planning. HR Management and Government Relations Management need attention. Customer Management. Training Management and Partner Management need attention but are of lower priority.
- D. Agent Management needs immediate attention. Market Planning. Government Relations Management, and HR Management have Issues but are of lower priority Partner Management. Customer Management, and Training Management are new business capabilities that do not exist.
Answer: A
Explanation:
The business capability map provided uses color coding to represent the maturity levels of various business capabilities in strategic, core, and supporting functions. The colors indicate the current state or priority for development, with red indicating capabilities that are significantly below desired maturity levels and thus require immediate attention. In this case, Policy Management, Government Relations Management, and HR Management are marked as red, signaling the need for urgent improvement. Yellow indicates capabilities that are closer to the desired state but still need attention, while green shows capabilities that have achieved the desired maturity level. Purple indicates a missing capability that does not currently exist in the enterprise, which is the case for Agent Management.
NEW QUESTION # 69
Which of the following best describes this diagram?
- A. Business Relationships diagram
- B. Business Capability Map
- C. Business Capabilities Layer diagram
- D. Business Capability/Value Stream Mapping
Answer: B
Explanation:
The diagram presented is best described as a Business Capability Map. Here's a detailed explanation:
* Business Capability Map:
* Definition: A Business Capability Map represents the various capabilities an organization requires to deliver its products and services and achieve its strategic objectives. It typically categorizes capabilities into different levels or tiers, such as strategic, core, and supporting capabilities.
* Diagram Analysis:
* Layers and Groupings: The diagram shows capabilities grouped into three categories: Strategic, Core, and Supporting. Each group lists specific business capabilities necessary for the organization's functioning.
* Color Coding: The use of different colors (green, red, yellow, purple) may indicate various aspects such as priority, status, or different business units. However, the primary purpose is to visually represent and categorize capabilities.
* TOGAF References:
* Phase B: Business Architecture: In this phase, creating a Business Capability Map is a crucial activity. It helps in understanding the business functions and aligning them with strategic goals.
* Capability-Based Planning: TOGAF promotes capability-based planning, which involves identifying, mapping, and analyzing business capabilities to ensure they support the overall strategy and objectives.
* Purpose and Benefits:
* Strategic Alignment: The Business Capability Map helps in aligning business capabilities with the strategic objectives of the organization. It provides a clear view of what the organization needs to do to achieve its goals.
* Gap Analysis: It is useful for conducting gap analysis by comparing current capabilities with the desired state, helping to identify areas for improvement.
* Resource Allocation: By understanding the different capabilities, organizations can allocate resources more effectively to areas that need development or enhancement.
In summary, the diagram is best described as a Business Capability Map because it visually represents and categorizes the various capabilities needed by the organization into strategic, core, and supporting layers, aligning them with the business strategy and objectives.
NEW QUESTION # 70
Which of the following Business Architecture concepts should the architect examine and search for when developing the Architecture Vision?
- A. Architecture Principles, Business Drivers
- B. Architecture Continuum, Architecture Repository
- C. Value Streams, Business Capabilities
- D. Implementation Factor Catalog, Business Value Assessment Matrix
Answer: C
Explanation:
When developing the Architecture Vision, it is essential for the architect to examine and search for Value Streams and Business Capabilities. Here's a detailed explanation:
* Architecture Vision Phase (Phase A):
* The Architecture Vision phase sets the overall direction and context for the architecture project. It defines the scope and vision for the future state architecture and establishes a shared understanding among stakeholders.
* Value Streams:
* Definition: Value streams represent the end-to-end set of activities that deliver value to customers or stakeholders. They provide a high-level view of how value is created and delivered within the organization.
* Importance: Understanding value streams helps in aligning the architecture with business processes and ensuring that the architecture supports the delivery of value.
* Business Capabilities:
* Definition: Business capabilities define what an organization needs to be able to do to achieve its business objectives. They represent the core functions or abilities of the organization.
* Importance: Identifying and understanding business capabilities is crucial for ensuring that the architecture addresses the critical functions of the business and supports its strategic goals.
* TOGAF ADM References:
* Phase A: Architecture Vision: In this phase, the architect examines value streams and business capabilities to understand the current state and define the desired future state. This helps in creating an architecture vision that is aligned with business objectives and supports value creation.
* Strategic Planning: Value streams and business capabilities provide a foundation for strategic planning, ensuring that the architecture is designed to support key business activities and capabilities.
In summary, when developing the Architecture Vision, examining value streams and business capabilities is essential for understanding how the organization delivers value and ensuring that the architecture supports critical business functions and strategic objectives.
NEW QUESTION # 71
Exhibit.
Consider the diagram of an architecture development cycle.
Select the correct phase names corresponding to the labels 1, 2 and 3?
- A. 1 Requirements Management - 2 Implementation Governance - 3 Preliminary
- B. 1 Continuous Improvement - 2 Migration Planning - 3 Architecture Vision
- C. 1 Requirements Management - 2 Change Management - 3 Strategy
- D. 1 Architecture Governance - 2 Implementation Governance - 3 Preliminary
Answer: A
Explanation:
The diagram of an architecture development cycle shows three phases of the TOGAF ADM. The correct phase names corresponding to the labels 1, 2 and 3 are Requirements Management, Implementation Governance, and Preliminary respectively3. These phases are described as follows:
* Requirements Management (label 1): This phase provides a process for managing architecture requirements throughout the ADM cycle3. It ensures that requirements are captured, stored, prioritized, and addressed by relevant ADM phases3. It also ensures that requirements are validated and updated as necessary3.
* Implementation Governance (label 2): This phase provides a process for ensuring that the implementation projects conform to the defined architecture3. It involves establishing an implementation governance model, defining architecture contracts and compliance reviews, and monitoring and supporting the implementation projects3.
* Preliminary (label 3): This phase provides a process for preparing and planning the architecture project3. It involves defining the scope and vision of the project, customizing the ADM process and content framework, defining principles and governance structures, and evaluating the enterprise architecture maturity and readiness3.
NEW QUESTION # 72
Consider the following:
In Phase A a business capability map and a core set of value streams were created while developing the Architecture Vision.
Why would such Architecture Descriptions need to be updated in Phase B?
- A. Phase B requires that all Architecture Descriptions be updated.
- B. The development of Business Architecture Descriptions is always iterative.
- C. A new value stream was assessed as in the project scope.
- D. Phase B is an ADM Architecture Development phase.
Answer: B
Explanation:
The development of Business Architecture Descriptions is always iterative because it involves constant refinement and validation of the architecture models and views based on stakeholder feedback and changing requirements. Therefore, any Architecture Description that was created in Phase A may need to be updated in Phase B as new information or insights emerge. Phase B does not require that all Architecture Descriptions be updated, only those that are relevant and necessary for the Business Architecture. Phase B is an ADM Architecture Development phase, but that does not explain why Architecture Descriptions need to be updated. A new value stream may or may not require updating existing Architecture Descriptions depending on its scope and impact.
In TOGAF's ADM, the development of architecture is an iterative process. During Phase A, initial business capability maps and value streams are created to establish the Architecture Vision. However, as stakeholders provide more detailed inputs and requirements are refined, it is necessary to update the Architecture Descriptions. This is an iterative process that continues into Phase B, Business Architecture, where these descriptions are further developed and refined.
NEW QUESTION # 73
In what TOGAF ADM phase is the organization map linked built out with the detail and relationships to overviews in order to understand the needs of the organization?
- A. Preliminary Phase
- B. Phase E
- C. Phase A
- D. Phase B
Answer: C
Explanation:
Phase A (Architecture Vision) of the TOGAF ADM builds out initial organizational maps to understand high- level organizational needs and link them to architecture goals. This step provides foundational insight that informs subsequent phases, particularly for stakeholder alignment.
References: TOGAF ADM Phase A.
In TOGAF, Phase A (Architecture Vision) is where the organization map is developed in detail and linked to overviews to understand the organizational needs. This phase focuses on:
* Defining the scope of the architecture:This includes identifying the parts of the organization that will be affected by the architecture and the timeframe for the architecture development.
* Identifying stakeholders and their concerns:Understanding the needs and expectations of different stakeholders is crucial for developing an architecture that meets their requirements.
* Creating a high-level architecture vision:This vision outlines the desired future state of the architecture and how it will support the organization's strategic goals.
NEW QUESTION # 74
Which of the following describes how business models are used within the TOGAF standard?
- A. To help formulate architecture and business principles.
- B. To tailor the enterprise architecture for the business.
- C. To identify, classify, and mitigate risks to the business.
- D. To document the factors impacting the business migration plan.
Answer: B
Explanation:
Business models within the TOGAF standard are used to tailor the enterprise architecture to the specific needs and context of the business. They help in understanding how the business operates, its structure, and how it intends to achieve its goals, which is critical for ensuring that the enterprise architecture aligns with and supports the business objectives.
NEW QUESTION # 75
Consider the following chart:
Which important concept for Enterprise Architecture Practitioners does it illustrate?
- A. Enterprise Architects must use Gantt charts to communicate with Stakeholders.
- B. An Enterprise Architecture must be developed in phases with a limited fixed duration.
- C. ADM phases must be run in a sequenced approach to produce the Architecture
- D. ADM phases must be run simultaneously until the relevant information has been produced
Answer: C
Explanation:
The chart depicted is a Gantt chart, which typically represents the schedule for project activities. In the context of TOGAF's ADM, it is used to illustrate the sequence and interdependencies of tasks across different phases of architecture development. The ADM is an iterative cycle that includes various phases, from the preliminary phase, through architecture vision, business, information systems, and technology architectures, to opportunities and solutions, migration planning, implementation governance, and architecture change management. Each phase must be conducted in a sequence to ensure that the outputs of one phase feed into the next, thereby producing a coherent and structured architecture.
NEW QUESTION # 76
Which of the following is a derived relationship in an organization map?
- A. Value flow
- B. Location
- C. Scope of enterprise
- D. Capability
Answer: A
Explanation:
According to the TOGAF Series Guide: Organization Mapping, one of the derived relationships in an organization map is value flow1. A value flow is a relationship that shows how value is exchanged between business units or other entities in an organization map1. A value flow can be expressed as a verb phrase that indicates what type of value is transferred or shared between entities1. For example, in an organization map for an online retailer, a possible value flow could be "Delivers products" between the Warehouse business unit and the Customer entity.
NEW QUESTION # 77
Which of the following is a difference between an organization map and an organization chart?
- A. An organization map is limited to formal relationships between business units.
- B. An organization map highlights where in the organization that stakeholder concerns are not being addressed by a business architecture.
- C. An organization map can be impacted by a business model change.
- D. An organization map reduces the time, cost, and risk of business operations.
Answer: B
Explanation:
An organization map is a technique that can be used to show how a business architecture addresses stakeholder concerns across different parts of an organization3. It can highlight gaps or overlaps in the coverage of stakeholder concerns by a business architecture. An organization chart, on the other hand, is a diagram that shows the formal structure and hierarchy of an organization, such as reporting relationships and roles4. An organization chart does not necessarily show how stakeholder concerns are addressed by a business architecture.
NEW QUESTION # 78
In business capability mapping, when you have documented all of the business capabilities, what should you do next?
- A. Organize the business capabilities in a logical manner.
- B. Map the business capabilities to stakeholder concerns.
- C. Draw up a business value assessment for each of the business capabilities.
- D. Identify the human and computer actors associated with each business capability.
Answer: A
Explanation:
According to the TOGAF Series Guide: Business Capabilities, after documenting all of the business capabilities, the next step is to organize them in a logical manner1. This can be done by using techniques such as layering, sorting, mapping, and leveling1. These techniques can help to classify, group, and align capabilities into categories for a deeper understanding of how they support the business goals and objectives1. Organizing the business capabilities can also help to identify dependencies, gaps, overlaps, or redundancies among them1.
NEW QUESTION # 79
Complete the sentence. A business model is a description of the rationale for how an organization creates, delivers, and captures
- A. best practices
- B. strategy
- C. value
- D. business function
Answer: C
Explanation:
A business model is a description of the rationale for how an organization creates, delivers, and captures value4. Value is defined as the worth or importance of something to someone6. A business model explains what value proposition the organization offers to its customers, what revenue streams it generates from delivering the value proposition, what cost structure it incurs to create and deliver the value proposition, what key resources and activities are needed to create and deliver the value proposition, and what key partnerships are leveraged to support the value creation and delivery process4.
NEW QUESTION # 80
Consider the following representation of a business model:
Which of the following business models is this an example of?
- A. The Four Box Framework
- B. The Business Model Innovation factory
- C. The Business Model Cube
Answer: A
Explanation:
The provided representation of a business model appears to be a variant of the Business Model Canvas, which is a strategic management template for developing new or documenting existing business models. It is a visual chart with elements describing a firm's value proposition, infrastructure, customers, and finances. The model assists firms in aligning their activities by illustrating potential trade-offs. Since none of the options precisely match the Business Model Canvas and the Four Box Framework is conceptually closest to the Business Model Canvas, option B is the best available answer, albeit not a perfect match.
NEW QUESTION # 81
Which of the following best describes a business capability?
- A. It is an articulation of the relationships between business entities that make up the enterprise.
- B. It is a qualitative statement of intent that should be met by the enterprise architecture capability developing the business architecture.
- C. It delineates what a business does without an explanation of how, why, or where the capability is used.
- D. It is a detailed description of the architectural approach to realize a particular solution.
Answer: C
Explanation:
According to the TOGAF Series Guide to Business Capabilities (Version 2), a business capability is defined as "a particular ability or capacity that a business may possess or exchange to achieve a specific purpose or outcome" 4. A business capability delineates what a business does without an explanation of how, why, or where the capability is used4. A business capability can be expressed as a verb phrase that indicates what function or service the capability provides4. For example, some possible business capabilities are "Manage Customer Relationships", "Deliver Products", or "Perform Financial Analysis".
NEW QUESTION # 82
Consider the following example using the Business Model Canvas:
What are the segments labeled A, D and I?
- A. Customer Relationships, Value Propositions, Market Segments.
- B. Key Partners, Customer Relationships, Revenue Streams.
- C. Key Resources. Revenue Streams. Cost Structure
- D. Customer Segments, Value Add Services, Profit Channels.
Answer: B
Explanation:
The segments labeled A, D and I in the Business Model Canvas are Key Partners, Customer Relationships, and Revenue Streams respectively1. The Business ModelCanvas is a tool that can be used to describe how an organization creates, delivers, and captures value for its stakeholders1. The Business Model Canvas consists of nine segments that cover four main areas: customers (segments B,C,D), offer (segment E), infrastructure (segments A,F,G), and financial viability (segments H,I)1. The segments are defined as follows:
* Key Partners (segment A): The network of suppliers and partners that make the business model work1. Key partners can provide resources, activities, or support that enable the organization to offer its value proposition1.
* Customer Relationships (segment D): The type of relationship that the organization establishes with its customer segments1. Customer relationships can be driven by customer acquisition, retention, or loyalty objectives1. Customer relationships can also influence the customer experience and satisfaction1.
* Revenue Streams (segment I): The sources of income that the organization generates from each customer segment1. Revenue streams can be derived from different pricing mechanisms, such as asset sale, subscription, fee, commission, or advertising1. Revenue streams can also reflect the value that customers are willing to pay for the organization's offer1.
NEW QUESTION # 83
Which of the following is a difference between an organization map and an organization chart?
- A. An organization map describes the complex interactions and relationship within an organization.
- B. An organization map highlights where in the organization that stakeholder concerns are not being addressed by a business architecture.
- C. An organization map improves the ability to deliver information within the organization by highlighting the consumers.
- D. An organization map reduces the time, cost, and risk of business operations.
Answer: A
Explanation:
An organization map provides a detailed representation of the complex interactions and relationships within an organization, going beyond the hierarchical structure shown in an organization chart. It includes the connections and dependencies between different business units, teams, and roles, offering a more comprehensive view of how the organization operates and collaborates to achieve its objectives.
NEW QUESTION # 84
Consider the diagram.
What are the items labelled A, B and C?
- A. A-Enterprise Architecture, B-Architecture Building Blocks, C-Solutions Building Blocks
- B. A-Enterprise Strategic Architecture, B-Segment Architecture, C-Solutions Architecture
- C. A-Enterprise Continuum, B-Architecture Continuum. C-Solutions Continuum
- D. A-Architecture Vision, B-Business Architecture. C-lnformation Systems Architecture
Answer: C
Explanation:
The diagram shows the Enterprise Continuum, which is a view of the Architecture Repository that provides methods for classifying architecture and solution artifacts as they evolve from generic Foundation Architectures to Organization-Specific Architectures4. The Enterprise Continuum comprises two complementary concepts: the Architecture Continuum and the Solutions Continuum. The Architecture Continuum shows the relationships among foundational frameworks, common system architectures, industry architectures, and enterprise architectures4. The Solutions Continuum shows the relationships among foundational solutions, common system solutions, industry solutions, and enterprise solutions4.
NEW QUESTION # 85
Complete the sentence An information map is a_______________________________________.
- A. description of the business units that use capabilities and participate in value streams
- B. target description of information assets needed to support the business
- C. representation of where the business information is held within the enterprise
- D. collection of information concepts and their relationships to one another
Answer: D
Explanation:
An information map is essentially a collection of information concepts along with their relationships. It's a visual representation that shows how various types of information are related and used throughout the organization. This can include data entities, their attributes, and the flow of data between different business processes or systems. Information mapping helps in understanding the structure of an organization's data and is a key part of the information system architecture within TOGAF's content framework.
NEW QUESTION # 86
Consider the following graphic illustrating a method supporting the TOGAF ADM.
What does the method help identify?
- A. Architecture Solutions
- B. Alternative Target Architectures
- C. Solution Building Blocks
- D. Business Scenarios
Answer: B
Explanation:
The graphic illustrates a method for developing alternative target architectures in Phase E of the TOGAF ADM1. The method involves identifying and evaluating candidate architectures based on criteria such as business value, cost, risk, and feasibility1. The method helps to identify the most suitable architecture solution for the enterprise.
NEW QUESTION # 87
Refer to the table below:
Which ADM Phase(s) does this describe?
- A. Preliminary Phase
- B. Phase E
- C. Phase B
- D. Phase B. C and D
Answer: D
Explanation:
The table describes the steps involved in Phase B (Business Architecture), Phase C (Information Systems Architectures), and Phase D (Technology Architecture) of the TOGAF ADM5. These phases are responsible for developing the target architectures for each domain and identifying the gaps between the baseline and target architectures. The table shows the outputs and outcomes of each phase, as well as the essential knowledge required for each phase.
NEW QUESTION # 88
......
The Open Group OGBA-101 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Ace OGBA-101 Certification with 109 Actual Questions: https://www.updatedumps.com/TheOpenGroup/OGBA-101-updated-exam-dumps.html
Free The Open Group OGBA-101 Exam Question Practice Exams: https://drive.google.com/open?id=1Us7bGUXpJ1nSGqXu98DfCJqbcFbDKut4