UPDATED [2024] Pass Juniper JN0-104 Exam in First Attempt Guaranteed
Pass JN0-104 Exam Latest Practice Questions
The JN0-104 exam covers a wide range of topics related to Junos OS, including networking fundamentals, routing, switching, security, and Junos OS configuration. JN0-104 exam is designed to test the candidate's ability to configure, monitor, and troubleshoot Junos devices.
NEW QUESTION # 19
Which command will display only direct routes?
- A. show ip route direct
- B. show route protocol direct
- C. show route
- D. show route inet.0 direct
Answer: B
NEW QUESTION # 20
What is the network address for a host with an IP address of 192.168.87.125/16?
- A. 192.168.87.0
- B. 192.168.96.0
- C. 192.168.128.0
- D. 192.168.0.0
Answer: A
NEW QUESTION # 21
Which two commands will provide the current configuration of the MX1-PE1 BGP group on your router? (Choose two.)
- A. user@router# show groups | display set | match MX1-PE1
- B. user@router> show configuration | match set | match MX1-PE1
- C. user@router# show | display set | match MX1-PE1
- D. user@router> show configuration | dispalv set | match MX1-PE1
Answer: C,D
NEW QUESTION # 22
Which two routing policy actions are considered policy flow control actions in the Junos OS? (Choose two.)
- A. next term
- B. next hop
- C. next policy
- D. accept
Answer: B,D
Explanation:
https://www.juniper.net/documentation/us/en/software/junos/routing-policy/topics/concept/policy-configuring-actions-in-routing-policy-terms.html
NEW QUESTION # 23
What is the name of the volume containing the software and files used for the day-to-day operation of a device using Junos with upgraded FreeBSD?
- A. loam
- B. /var
- C. /active
- D. /junos
Answer: D
NEW QUESTION # 24
What is the decimal equivalent of 00000100?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 25
Which device or function is typically used to break up individual broadcast domains?
- A. hub
- B. bridge
- C. switch
- D. router
Answer: D
NEW QUESTION # 26
What is the purpose of the discard action of a firewall filter?
- A. The system silently drops the packet.
- B. The system drops the packet and logs the entry.
- C. The system evaluates the next term in the policy.
- D. The system drops the packet and sends an ICMP message.
Answer: A
NEW QUESTION # 27
What are two modes of unicast reverse path forwarding? (Choose two.)
- A. High
- B. Strict
- C. Low
- D. Loose
Answer: B,D
NEW QUESTION # 28
You must configure the 2bfc:0000:0000:beef:0217:cbff:0000:5c85 IPv6 address on your device.
In this scenario, which three addresses are correct? (Choose three.)
- A. 2bfc:0:beef:0217:cbff:0:5c85
- B. 2BFCnBEEF:0217:CBFF:0:5C85
- C. 2BFC::BEEF:217:CBFF::5C85
- D. 2bfc:0:0:beef:0217:cbff:0:5c85
- E. 2bfc::beef:217:cbff:0:5c85
Answer: B,D,E
NEW QUESTION # 29
Which command can be used to view the active alarms?
- A. show service alarms
- B. show system alarms
- C. show chassis state
- D. show hardware state
Answer: B
NEW QUESTION # 30
Which statement is true about a forwarding table?
- A. It contains routes learned from all protocols to a destination.
- B. It stores a subset of information from the routing table.
- C. Every routing protocol maintains its own forwarding table.
- D. It provides a database for routes selected and placed into the routing table.
Answer: B
NEW QUESTION # 31
Which two syslog files will be present in the configuration after factory-defaults have been loaded?
- A. authorization and events
- B. syslog-messages and NVRAM
- C. system and chassis
- D. messages and interactive-commands
Answer: D
NEW QUESTION # 32
Which of these about exception traffic is true?
- A. The internal link rate-limits exception traffic to protect the RE.
- B. Only PFE is responsible for handling exception traffic.
- C. When congestion occurs, exception traffic is not prioritised.
- D. Forwarding tables are used to forward exception traffic.
Answer: A
NEW QUESTION # 33
Exhibit:
Which type of route does the configuration create?
- A. a default gateway
- B. an indirect next hop
- C. a non-advertised route
- D. a generated route
Answer: A
NEW QUESTION # 34
Which account is used to access a Junos device in factory-default configuration?
- A. admin
- B. user
- C. root
- D. juniper
Answer: C
NEW QUESTION # 35
......
Juniper JN0-104 Study Guide Archives : https://www.updatedumps.com/Juniper/JN0-104-updated-exam-dumps.html
Download JN0-104 Mock Test Study Material: https://drive.google.com/open?id=14ojIaT-RafBHdwqxM8SRYBXO30D8E3n9