Updated Aug-2022 Exam Materials for You to Prepare & Pass 300-815 Exam.
Pass Your 300-815 Exam at the First Try with 100% Real Exam
NEW QUESTION 59
Which configuration must an administrator perform to display Translation Pattern operations in Cisco Unified Communications Manager SDL traces?
- A. Set up the Digit Analysis Complexity in Service Parameters for Cisco Unified CM to TranslationAndAlternatePatternAnalysis.
- B. By default, the Translation Patterns operations are printed in SDL traces, so no additional configuration is necessary.
- C. Check the Translation Patterns Analysis check box in Micro Traces on the Cisco Unified CM Serviceability page.
- D. Enable the Detailed Call Analysis option under Enterprise Parameters for Unified CM.
Answer: D
Explanation:
Reference:
https://community.cisco.com/t5/collaboration-voice-and-video/taking-sip-call-trace-on-cisco-unified- cm-using-rtmt/ta-p/3161200
NEW QUESTION 60
Refer to the exhibits.
Regions have been configured for all major branches based on the available circuit bandwidth. Some calls from Region A endpoints to Region B endpoints are failing to connect. How is this issue resolved?
- A. Update the calling search space for affected endpoints to none.
- B. Add a media resource to transcode between available capabilities.
- C. Update all regions to 8 kbps maximum audio bitrate.
- D. Increase the number of available media termination points.
Answer: B
NEW QUESTION 61
Which configuration element of a hunt group allows for changing Calling Party Transformations settings?
- A. line group
- B. hunt pilot
- C. route group
- D. hunt list
Answer: B
Explanation:
Section: Cisco Unified CM Call Control Features
Explanation/Reference:
Reference: https://community.cisco.com/t5/ip-telephony-and-phones/call-alerting-on-hunt-group-as-shared-line/ td-p/2658015
NEW QUESTION 62
When configuring hunt groups, where do you add the individual directory numbers that will be part of the group?
- A. line group
- B. route group
- C. hunt pilot
- D. hunt list
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/ cucm_b_system-configuration-guide-1201/cucm_b_system-configuration-guide-1201_chapter_010101.html
NEW QUESTION 63 
Refer to the exhibit. Users report that when they dial the emergency number 9911 from any internal phone, it takes a long time to connect with the emergency operator. Which action resolves this issue?
- A. Point the emergency pattern directly to the PSTN gateway.
- B. Check the Urgent Priority check box under 9.911 pattern.
- C. Adjust the service parameter T204 timer to the desired value.
- D. Adjust the service parameter T302 timet to the desired value.
Answer: B
Explanation:
Section: Call Control and Dial Planning
NEW QUESTION 64 
Refer to the exhibit. An engineer configures Cisco Unified Border Element to connect the enterprise VoIP network with a SIP telephony provider. Calls are not working in either direction. What must be configured in the dial peer 1 to fix the issue?
- A. answer-address 555 ........
- B. session-protocol sipv2
- C. incoming called number 555.......
- D. codec g729
Answer: C
Explanation:
Section: Call Control and Dial Planning
NEW QUESTION 65
Which IOS command creates a SIP-enabled dial peer?
- A. voice dial-peer 20 sip
- B. dial-peer voice 20 voip
- C. dial-peer voice 20 pots
- D. dial peer voice 20 sip
Answer: B
NEW QUESTION 66
Refer to the exhibit.
How many maximum hops can an ILS update traverse?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 67
When locations-based Call Admission Control denies the call, which two masks can AAR apply when routing the call through the PSTN? (Choose two.)
- A. +E.164 alternate number mask
- B. enterrise alternate number mask
- C. called party transform mask
- D. AAR destination mask
- E. external phone number mask
Answer: D,E
NEW QUESTION 68 
Refer to the exhibit. In an active SIP call between phone user A and phone user B, phone A initiates a call transfer to phone user
C. Which two scenarios are correct? (Choose two.)
- A. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_B User Hold MOH Audio Source settings.
- B. Phone_A sends a SIP-REFER message to the Cisco Unified Communications Manager with Phone_C information in the Refer-To section.
- C. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_A User Hold MOH Audio Source settings.
- D. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the music on hold and the MOH audio is chosen from Phone_A Network Hold MOH Audio Source settings.
- E. Phone_B sends a SIP-REFER message to the Cisco Unified CM with Phone_C information in the Refer-To section.
Answer: A,B
Explanation:
Section: Signaling and Media Protocols
NEW QUESTION 69
Which two configuration parameters are prerequisites to set Native Call Queuing on Cisco Unified Communications Manager? (Choose two.)
- A. A unicast music on hold audio source must be configured.
- B. Cisco IP Voice Media Streaming Service must be activated on at least one node in the cluster.
- C. The maximum number of callers allowed in queue must be 10.
- D. The phone button template must have the Queue Status Softkey configured.
- E. Cisco RIS data collector service must be running on the same server as the Cisco CallManager service.
Answer: B,E
NEW QUESTION 70
The Cisco Unified Communications Manager Dialed Number Analyzer allows analysis of calls from which two devices? (Choose two.)
- A. CTI ports
- B. CTI route points
- C. IP phones
- D. translation patterns
- E. device pools
Answer: A,C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/dna/11_5_1/ CUCM_BK_CBA47A6E_00_cucm-dna-guide-115/CUCM_BK_CBA47A6E_00_cucm-dna-guide- 115_chapter_01.html#CUCM_TP_A5DA99E0_00
NEW QUESTION 71
Refer to the exhibit.
A user reports that when they call a specific phone number, no one answers the call, but when they call from a mobile phone, the call is answered. The engineer troubleshooting the issue is expecting the far-end gateway to cut through audio on the 183 Session Progress SIP message. Which SIP Profile configuration element is necessary for the Cisco Unified Communications Manager to send acknowledgement of provisional responses?
- A. On the SIP Profile, the configuration parameter SIP Rel1XX Options must be set to Send PRACK for all 1xx Messages.
- B. Allow Passthrough of Configured Line Device Caller Information must be enabled.
- C. Accept Audio Codec Preferences in Received Offer must be set to On.
- D. Early Offer for G Clear Calls must be enabled.
Answer: A
NEW QUESTION 72
End users at a new site report being unable to hear the remote party when calling or being called by users at headquarters. Calls to and from the PSTN work as expected. To investigate the SIP signaling to troubleshoot the problem, which field can provide a hint for troubleshooting?
- A. o= line of SDP content
- B. Contact: header of the 200 OK response
- C. c= line of SDP content
- D. Allow: header if the 200 OK response
Answer: A
Explanation:
Section: Signaling and Media Protocols
NEW QUESTION 73
An administrator discovers that employees are making unauthorized long-distance and international calls from logged-off Extension Mobility phones when the authorized users are away from their desks Which two configurations should the administrator configure in the Cisco UCM to avoid this issue? (Choose two.)
- A. Add the long-distance & international pattern's partitions to the calling search space of the physical phone's directory number.
- B. Remove the long-distance & international pattern's partitions from the calling search space of the device profile.
- C. Add the long-distance & international pattern's partitions to the calling search space of the physical phone.
- D. Add the long-distance & international pattern's partitions to the calling search space of the device profile
- E. Remove the long-distance & international pattern's partitions from the calling search space of the physical phone.
Answer: D,E
NEW QUESTION 74
End users at a new site report being unable to hear the remote party when calling or being called by users at headquarters. Calls to and from the PSTN work as expected. To investigate the SIP signaling to troubleshoot the problem, which field can provide a hint for troubleshooting?
- A. Contact: header of the 200 OK response
- B. c= line of SDP content
- C. Allow: header if the 200 OK response
- D. o= line of SDP content
Answer: B
NEW QUESTION 75
Refer to the exhibit.
An engineer configures Cisco Unified Border Element to connect the enterprise VoIP network with a SIP telephony provider. Calls are not working in either direction. What must be configured in the dial peer 1 to fix the issue?
- A. answer-address 555 ........
- B. codec g729
- C. session-protocol sipv2
- D. incoming called number 555.......
Answer: C
NEW QUESTION 76
A user in location X dials an extension at location
Y. The call travels through a QoS-enabled WAN network, but the user experiences choppy or clipped audio. What is the cause of this issue?
- A. ptime mismatch
- B. codec mismatch
- C. phone class of service issue
- D. missing Call Admission Control
Answer: B
Explanation:
Section: Cisco Unified Border Element
NEW QUESTION 77
Refer to the exhibit.
An engineer is troubleshooting an issue where inbound calls to Cisco UCM with early media fail to establish. While investigating the issue, the engineer finds that Cisco UCM is set to require a PRACK. but the Cisco Unified Border Element is not sending it. Which command is causing this issue?
- A. voice-class sip early-media update block
- B. voice-class sip rel1xx disable
- C. voice-class midcall-signaling block
- D. voice-class sip conn-reuse
Answer: B
NEW QUESTION 78
Which description of RTP timestamps or sequence numbers is true?
- A. Sequence numbers increase by four for each RTP packet transmitted.
- B. Timestamps increase by the time "carrying" by a packet.
- C. The sequence number is used to detect losses.
- D. The timestamp is used to place the incoming audio and video packets in the correct timing order (playout delay compensation).
Answer: D
Explanation:
Section: Signaling and Media Protocols
Explanation/Reference: https://www.cs.columbia.edu/~hgs/rtp/faq.html
NEW QUESTION 79
An engineer set up and successfully tested a TEHO solution on the Cisco UCM. PSTN calls are routed correctly using the IP WAN as close to the final PSTN destination as possible. However, suddenly, calls start using the backup local gateway instead. What is causing the issue?
- A. LAN connectivity
- B. route list and route group
- C. route pattern
- D. WAN connectivity
Answer: D
NEW QUESTION 80
Configure Call Queuing in Cisco Unified Communications Manager. Where do you set the maximum number of callers in the queue?
- A. in the telephony service configuration
- B. in the queuing configuration
- C. in Cisco Unified CM Service Parameters
- D. in Cisco Unified CM Enterprise Parameters
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications- manager-callmanager/200453-Configure-CUCM-Native-Call-Queuing-Featu.html
NEW QUESTION 81
......
Cisco 300-815 CLACCM exam, which is also called Implementing Cisco Advanced Call Control and Mobility Services, will give you access to two certifications: CCNP Collaboration and Cisco Certified Specialist – Collaboration Call Control and Mobility Implementation. These are the professional and specialist-level certificates, respectively, offered by Cisco, arguably the best technology firm in the world.
300-815 is not the only requirement to fulfill to earn CCNP Collaboration. To get accredited, the candidates also have to pass the core test, 350-801 CLCOR. There are no specific prerequisites for 300-815 exam, so all you need is a proper understanding of networking technologies and Cisco collaboration solutions.
Updated 300-815 Certification Exam Sample Questions: https://www.updatedumps.com/Cisco/300-815-updated-exam-dumps.html
Get Real Exam Questions for 300-815 with New Questions: https://drive.google.com/open?id=1MCBlP8jN76LVLWFW8VxlvPQX9J-O8k1B