Valid 300-730 Test Answers & Cisco 300-730 Exam PDF
Cisco 300-730 Certification Real 2025 Mock Exam
Cisco 300-730 certification exam is designed to evaluate the knowledge and skills of IT professionals in implementing secure solutions with virtual private networks (VPNs). Implementing Secure Solutions with Virtual Private Networks certification is ideal for network security engineers, network administrators, and other IT professionals who want to demonstrate their expertise in deploying and managing VPN solutions. 300-730 exam covers a wide range of topics, including VPN encryption protocols, network security policies, and troubleshooting VPN issues.
NEW QUESTION # 31
Refer to the exhibit.
Which type of VPN implementation is displayed?
- A. IKEv2 backup gateway
- B. IKEv1 cluster
- C. IKEv2 reconnect
- D. IKEv2 load balancer
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/xe-16-10/sec-flex-vpn-xe-16-10-book/sec-cfg-clb-supp.html
NEW QUESTION # 32
What must be configured in a FlexVPN deployment to allow for direct communication between spokes connected to different hubs?
- A. EIGRP must be used as routing protocol.
- B. A GRE tunnel must exist between hub routers.
- C. Hub routers must be on same Layer 2 network.
- D. Load balancing must be disabled.
Answer: B
NEW QUESTION # 33
An engineer is configuring clientless SSL VPN. The finance department has a database server that only they should access, but the sales department can currently access it. The finance and the sales departments are configured as separate group-policies. What must be added to the configuration to make sure the users in the sales department cannot access the finance department server?
- A. webtype ACL
- B. smart tunnel
- C. tunnel group lock
- D. port forwarding
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa92/configuration/general/asa-general-cli/acl-webtype.pdf
NEW QUESTION # 34
A DMVPN spoke router tunnel is up and passing traffic, but it cannot establish an EIGRP neighbor relationship with the hub router. Which solution resolves this issue?
- A. Remove the EIGRP stub configuration on the spoke tunnel interface.
- B. Enable EIGRP Split Horizon on the hub tunnel interface.
- C. Configure the dynamic NHRP multicast map on the hub tunnel interface.
- D. Enable the EIGRP next hop self feature on the hub tunnel interface.
Answer: C
NEW QUESTION # 35
Which technology works with IPsec stateful failover?
- A. GRE
- B. HSRP
- C. GLBR
- D. VRRP
Answer: B
Explanation:
HSRP (Hot Standby Router Protocol). HSRP is a Cisco proprietary protocol that provides stateful failover for IPsec virtual private networks (VPNs). It is used to create a virtual router in order to provide redundancy in the event of an IPsec VPN failure. HSRP works by assigning a single primary router to manage the connection and forwarding traffic to the secondary router if the primary router fails.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_vpnav/configuration/15-mt/sec-vpn-availability-15-mt-book/sec-state-fail-ipsec.html
NEW QUESTION # 36
Which IKE identity does an IOS/IOS-XE headend expect to receive if an IPsec Cisco AnyConnect client uses default settings?
- A. *$SecureMobilityClient$*
- B. *$RemoteAccessVpnClient$*
- C. *$DfltlkeldentityS*
- D. *$AnyConnectClient$*
Answer: D
Explanation:
Section: Remote access VPNs
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect- IKEv2-Remote-Access.html
NEW QUESTION # 37
Refer to the exhibit.
Which type of mismatch is causing the problem with the IPsec VPN tunnel?
- A. preshared key
- B. Phase 1 policy
- C. crypto access list
- D. transform set
Answer: A
Explanation:
IKE Message from X.X.X.X Failed its Sanity Check or is Malformed
This debug error appears if the pre-shared keys on the peers do not match. In order to fix this issue, check the pre-shared keys on both sides.
1d00H:%CRPTO-4-IKMP_BAD_MESSAGE: IKE message from 198.51.100.1 failed its sanity check or is malformed
https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/5409-ipsec-debug-00.html#anc17
NEW QUESTION # 38
Which statement about GETVPN is true?
- A. Group members must acknowledge all KEK and TEK rekeys, regardless of configuration.
- B. TEK rekeys can be load-balanced between two key servers operating in COOP.
- C. The configuration that defines which traffic to encrypt originates from the key server.
- D. The pseudotime that is used for replay checking is synchronized via NTP.
Answer: C
NEW QUESTION # 39
The corporate network security policy requires that all internet and network traffic must be tunneled to the corporate office. Remote workers have been provided with printers to use locally at home while they are remotely connected to the corporate network. Which two steps must be executed to allow printing to the local printers? (Choose two.)
- A. Add a persistent static route in the client OS for the local LAN network.
- B. Configure the split-tunnel-policy on the Cisco ASA to tunnelall.
- C. Configure the split-tunnel-policy on the Cisco ASA to tunnelspecified.
- D. Check the Allow Local LAN access checkbox in the Cisco AnyConnect client.
- E. Configure the split-tunnel-policy on the Cisco ASA to excludespecified.
Answer: D,E
NEW QUESTION # 40
Refer to the exhibit.
An engineer must allow Cisco AnyConnect users to access the outside interface using protocol UDP 500/4500. In addition, these clients must be able to establish an SSL connection to update Cisco AnyConnect software over the same connection. Which two actions must be taken to achieve this goal? (Choose two.)
- A. IPsec (IKEv2) Allow Access must be checked on the outside interface.
- B. SSL Allow Access must be checked on the outside interface.
- C. IPsec (IKEv2) Enable Client Services must be checked on the outside interface.
- D. Bypass interface access lists for inbound VPN sessions must be unchecked.
- E. SSL Enable DTLS must be checked on the outside interface.
Answer: A,C
NEW QUESTION # 41
When troubleshooting FlexVPN spoke-to-spoke tunnels, what should be verified first?
- A. NHRP cache entries exist on the spoke.
- B. NHO routes exist on the spokes.
- C. The spokes have sent a resolution request.
- D. NHRP redirect is enabled on the hub.
Answer: C
Explanation:
The Next Hop Resolution Protocol (NHRP) redirect is not a strict requirement for FlexVPN spoke- to-spoke tunnels to function. NHRP redirect is typically used in DMVPN (Dynamic Multipoint Virtual Private Network) deployments to optimize the routing of traffic between spoke-to-spoke connections by allowing the hub to inform spokes about more efficient paths In a FlexVPN deployment, spokes send resolution requests to the hub for spoke-to-spoke communication. These resolution requests are typically related to Next Hop Resolution Protocol (NHRP) operations. NHRP is used in FlexVPN to dynamically map the public IP addresses of spokes to their private IP addresses, facilitating spoke-to-spoke communication without having to route all traffic through the hub.
NEW QUESTION # 42
Over which two transport mediums is FlexVPN deployed? (Choose two.)
- A. DWDM
- B. 5G
- C. internet
- D. VPLS
- E. MPLS
Answer: C,E
Explanation:
Transport network: FlexVPN can be deployed either over a public internet or a private Multiprotocol Label Switching (MPLS) VPN network. https://www.cisco.com/c/en/us/products/collateral/routers/asr-1000-series-aggregation-services-routers/data_sheet_c78-704277.html
NEW QUESTION # 43
Refer to the exhibit.
What is configured as a result of this command set?
- A. FlexVPN server to authorize groups by using an IPv6 external AAA
- B. FlexVPN client profile for IPv6
- C. FlexVPN server for an IPv6 dVTI session
- D. FlexVPN server to authenticate IPv6 peers by using EAP
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/xe-3s/sec-flex- vpn-xe-3s-book/sec-cfg-flex-clnt.html
NEW QUESTION # 44
Refer to the exhibit.
DMVPN spoke-to-spoke traffic works, but it passes through the hub, and never sends direct spoke-to-spoke traffic. Based on the tunnel interface configuration shown, what must be configured on the hub to solve the issue?
- A. Enable split horizon.
- B. Enable IP redirects.
- C. Enable NHRP shortcut.
- D. Enable NHRP redirect.
Answer: D
NEW QUESTION # 45
A company is setting up a dynamic crypto map on the Cisco ASA at the headquarters to accept connections from the branch offices. There will be no IP subnet overlap between the branch offices, but the engineer does not know which encryption domains will be requested by the branch offices. Additionally, the company security policy states that routing protocol traffic should not leave the HQ network. Which solution should be used to route traffic back to the branches from the Cisco ASA with minimal administrative effort?
- A. Configure snapshot routing with EIGRP to send out of band routing updates.
- B. Configure Reverse Route Injection on the dynamic crypto map.
- C. Configure static routes for remote subnets.
- D. Configure a default route with the tunneled keyword on all branch routers.
Answer: B
NEW QUESTION # 46
Refer to the exhibit. Based on the configuration output, what is the VPN technology?
- A. site-to-site
- B. multicast VPN
- C. L2VPN
- D. DMVPN
Answer: C
NEW QUESTION # 47
A network engineer must design a clientless VPN solution for a company. VPN users must be able to access several internal web servers. When reachability to those web servers was tested, it was found that one website is not being rewritten correctly by the ASA.
What is a potential solution for this issue while still allowing it to be a clientless VPN setup?
- A. Set up Cisco AnyConnect with a split tunnel that has the IP address of the web server.
- B. Set up a NAT rule that translates the ASA public address to the web server private address on port 80.
- C. Set up a smart tunnel with the IP address of the web server.
- D. Set up a WebACL to permit the IP address of the web server.
Answer: B
NEW QUESTION # 48
A clientless SSLVPN is set up to allow remote users to access internal HTTPS webservers.
Users can access all but one server and see the message "Connection Failed. Server
192.168.0.101 unavailable". Pings between the Cisco ASA and the webserver are successful, and users can connect to the webserver when they use their computer in the internal network.
Which action resolves this issue?
- A. Configure a DNS server that can resolve the webserver domain on the Cisco ASA.
- B. Add an SSL cipher that can be negotiated with the webserver to the Cisco ASA.
- C. Add the http 192.168.0.101 255.255.255.255 inside command to the Cisco ASA.
- D. Configure routing on the Cisco ASA so it can reach the webserver.
Answer: B
NEW QUESTION # 49
An administrator is setting up Cisco AnyConnect on a Cisco ASA with the requirement that AnyConnect automatically establishes a VPN when a company-owned laptop is connected to the internet outside of the corporate network. Which configuration meets these requirements?
- A. TND with user certificate authentication
- B. SBL with machine certificate authentication
- C. SBL with user certificate authentication
- D. TND with machine certificate authentication
Answer: D
Explanation:
Trusted Network Detection (TND) gives you the ability to have AnyConnect automatically disconnect a VPN connection when the user is inside the corporate network (the trusted network) and start the VPN connection when the user is outside the corporate network (the untrusted network). https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect41/administration/guide/b_AnyConnect_Administrator_Guide_4-1/configure-vpn.html#id_100236
NEW QUESTION # 50
Refer to the exhibit.
An IKEv2 site-to-site tunnel between an ASA and a remote peer is not building successfully. What will fix the problem based on the debug output?
- A. Ensure crypto IPsec policy matches on both VPN devices.
- B. Correct crypto access list on both VPN devices.
- C. Specify the peer IP address in the tunnel group name.
- D. Install the correct certificate to validate the peer.
Answer: A
NEW QUESTION # 51
......
Cisco 300-730 exam is a certification exam designed to test the knowledge and skills of IT professionals in implementing secure solutions with virtual private networks (VPNs). Implementing Secure Solutions with Virtual Private Networks certification is ideal for IT professionals who are responsible for managing and maintaining VPN solutions in their organization. 300-730 exam covers a wide range of topics such as VPN technologies, encryption and authentication protocols, VPN deployment models, and secure connectivity.
300-730 Exam Questions and Valid 300-730 Dumps PDF: https://www.updatedumps.com/Cisco/300-730-updated-exam-dumps.html
300-730 Brain Dump: A Study Guide with Tips & Tricks for passing Exam: https://drive.google.com/open?id=1bb7b1whk2JPfP3YHTjP6upHFJLDnK0SS