Verified NS0-184 dumps Q&As - 2024 Latest NS0-184 Download
Updated 100% Cover Real NS0-184 Exam Questions - 100% Pass Guarantee
NEW QUESTION # 14
You have a 2-node FAS8300 switchless ONTAP 9.8 cluster that serves NAS volumes. You have a data SVM that connects to the network using multimode LACP with VLAN tags.
In this scenario, which front-end FAS8300 network port would you create the data LIFs?
- A. a0a
- B. a0a-100
- C. e0e-100
- D. e0e
Answer: D
NEW QUESTION # 15
You are setting up a peer relationship between two ONTAP clusters.
In this scenario, which two statements are true regarding authentication?
- A. Peering authentication can be configured using LDAP users and groups.
- B. Peering authentication status can be verified with the cluster peer show command.
- C. Peering authentication can use an ONTAP generated passphrase.
- D. Peering authentication is required before enabling peering encryption.
Answer: B,C
NEW QUESTION # 16
Which three components are required when setting up a new ONTAP cluster? (Choose three.)
- A. Advanced Drive Partitioning
- B. node management IP
- C. password
- D. cluster management IP
- E. intercluster IP
Answer: B,D,E
NEW QUESTION # 17
You have a new 2-node FAS8700 ONTAP 9.8 cluster. One of the nodes has 24x16 TB NL-SAS disks assigned and available for a new aggregate. You created the aggregate with one RAID group and two spare disks.
In this scenario, how many data drives are in the aggregate?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 18
You completed a 2-node AFF A700 installation according to the poster. You run the disk show -fields owner command and notice that all drives are assigned to node 1.
In this scenario, which tool would you use to access documentation and guidelines to solve the issue?
- A. NET2
- B. Active IQ Unified Manager
- C. Active IQ One Collect
- D. NetAppDocs
Answer: D
NEW QUESTION # 19
You are planning to install a new ONTAP 9.7 All SAN Array (ASA) into your existing data center.
In this scenario, which cluster configuration is allowed with ASA controllers?
- A. Add the ASA controllers to an existing 10-node cluster.
- B. ASA controllers can only be installed as a standalone HA pair.
- C. ASA controllers can only be added to clusters that have existing SAN licenses.
- D. Add the ASA controllers to an existing 4-node cluster with NAS licenses.
Answer: C
NEW QUESTION # 20
Click the Exhibit button.
A customer has two Cisco 40GbE data switches. They want to connect the switches to an AFF A400 HA pair. The switches and the AFF A400 are approximately seven meters apart.
Referring to the exhibit, which two supported actions would allow you to accomplish this task? (Choose two.)
- A. Install 10 meter NetApp supported copper cables.
- B. Change the requirement for Ethernet cables.
- C. Change the requirement for optical cables.
- D. Relocate the switches or the AFF A400 so that the distance is less than five meters.
Answer: A,B
NEW QUESTION # 21
You are expanding an existing 4-node ONTAP 9.8 cluster with a FAS8300 HA pair by adding a new FAS500f HA pair. Before the expansion, you are asked to save the configuration of the cluster to a backup file.
In this scenario, which two ONTAP configuration backup methods are available? (Choose two.)
- A. storage VM
- B. cluster
- C. node
- D. switch
Answer: A,B
NEW QUESTION # 22
You are installing a new AFF A400 cluster for a customer. The customer indicates that they want to take advantage of AutoSupport On Demand.
In this scenario, which AutoSupport transport protocol must you use?
- A. SMTP
- B. HTTP
- C. FTP
- D. HTTPS
Answer: D
NEW QUESTION # 23
You have added two new AFF A250 nodes to an existing 4-node cluster with NetApp CN1610 cluster network switches. Although the nodes can join the cluster, the storage failover show command output shows that the NVRAM log is not synchronized, and it cannot reach the partner over an HA interconnect.
In this scenario, which two statements are true? (Choose two.)
- A. The AFF A250 requires switches with 25GbE port support.
- B. The AFF A250 requires switches with 40GbE port support.
- C. The AFF A250 uses the same port for the cluster and the HA interconnect.
- D. The AFF A250 uses different ports for the cluster and the HA interconnect.
Answer: A,D
NEW QUESTION # 24
Click the Exhibit button.
Referring to the exhibit, you installed a new AFF A250 HA system with FC at a customer site. The customer asks how many ports can be used for the Ethernet host connections.
In this scenario, what would you tell the customer?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 25
You installed a new 4-node AFF A400 ONTAP 9.8 cluster. The AFF400 controller data ports were automatically discovered by "automatic port placement".
In this scenario, which two ONTAP network settings were automatically configured? (Choose two.)
- A. subnets
- B. broadcast domains
- C. routes
- D. IPspaces
Answer: A,C
NEW QUESTION # 26
Your customer is migrating data from a legacy FAS8020 system that runs ONTAP 9.5 software to a new AFF A250 MetroCluster over IP configuration.
In this scenario, which two methods would be supported to migrate the data? (Choose two.)
- A. Perform a controller swap from the FAS8020 to the AFF A250s.
- B. Use a host-based copy migration method.
- C. Create a 4-node cluster on one side and use the vol move command to migrate the data.
- D. Configure a SnapMirror copy between the FAS8020 and the AFF A250 systems.
Answer: A,D
NEW QUESTION # 27
Click the Exhibit button.
What are two functions of the four Ethernet switches in the supported configuration that is shown in the exhibit? (Choose two.)
- A. to enable SyncMirror replication
- B. to provide a direct connection for the SnapMirror Synchronous (SM-S)
- C. to install cross-site cluster management switches
- D. to provide connectivity for NVRAM over iWARP
Answer: B,D
NEW QUESTION # 28
After a system panic, the NetApp Support team advises you to run the sldiag command.
Which two actions must be performed before you use this command? (Choose two.)
- A. At the LOADER prompt, type boot_maintenance.
- B. At the storage system prompt, type boot_maintenance.
- C. At the storage system prompt, type halt.
- D. At the LOADER prompt, type boot_diags.
Answer: C,D
NEW QUESTION # 29
Click the Exhibit button.
Immediately after installing a 4-node FAS8200 cluster, you discover that node, "cluster1-02", must be removed from the cluster. You want to use the cluster remove-node command to remove the node.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Move Epsilon to cluster1-02, then remove the node.
- B. Remove the node, then the cluster will elect a new master to remain in quorum.
- C. Make the node ineligible by using the cluster modify -eligibility false command, then remove the node.
- D. Verify that high availability is configured for failover to the HA partner, then remove the node.
Answer: A,D
NEW QUESTION # 30
Click the Exhibit button.
After installation of a new ONTAP cluster, you experience a problem. You successfully create a support case on the NetApp Support site. The customer asks you how to view the status of the case.
Referring to the exhibit, which two steps would allow the customer to accomplish this task? (Choose two.)
- A. Open My Cases, and select the 41747189 case number.
- B. Open https://support.netapp.com, using the customer credentials.
- C. Open https://support.netapp.com, using the partner credentials.
- D. Open My Cases, and select Create a Case.
Answer: A,B
NEW QUESTION # 31
When creating a new 3.8 TB SSD-based aggregate, what is the default RAID type used with ONTAP 9.8?
- A. RAID 0
- B. RAID 4
- C. RAID-TEC
- D. RAID DP
Answer: D
NEW QUESTION # 32
......
Use Real Dumps - 100% Free NS0-184 Exam Dumps: https://www.updatedumps.com/NetworkAppliance/NS0-184-updated-exam-dumps.html
Realistic NS0-184 Dumps Latest Practice Tests Dumps: https://drive.google.com/open?id=1-9N7JV1eQdxAqeYBoyi0Ju0x_z4zNy6q