(Mar-2025) 201 Exam Dumps Contains FREE Real Quesions from the Actual Exam
Free Test Engine Verified By F5 Networks Certification Study Materials Certified Experts
NEW QUESTION # 79
Refer to the exhibit. The BIG-IP Administrator needs to avoid overloading any of the Pool Members with connections, when they become active.
What should the BIG-IP Administrator configure to meet this requirement?
- A. Same Priority Group to each member
- B. Slow Ramp Time to the Pool
- C. Different Ratio for each member
- D. Action On Service Down to Reselect
Answer: B
NEW QUESTION # 80
One of the two members of a device group has been decommissioned. The BIG-IP Administrator tries to delete the device group, but is unsuccessful.
Prior to removing the device group, which action should be performed?
- A. Remove all members from the device group
- B. Make sure all members of the device group are in sync
- C. Disable the device group
- D. Remove the decommissioned device from the device group
Answer: A
NEW QUESTION # 81
Which statement describes a typical purpose of iRules?
- A. iRules can be used to add individual control characters to an HTTP data stream.
- B. iRules can examine a server response and remove it from a pool if the response is unexpected.
- C. iRules can be used to look at client requests and server responses to choose a pool member to select for load balancing
- D. iRules can be used to update the timers on monitors as a server load changes.
Answer: A
NEW QUESTION # 82
Which statement is true concerning iRule events?
- A. All client traffic has data that could be used to trigger iRule events.
- B. All iRule events relate to HTTP processes.
- C. If an iRule references an event that doesn't occur during the client's communication, the client's connection will be terminated prematurely.
- D. All iRule events are appropriate at any point in the clientserver communication.
Answer: A
NEW QUESTION # 83
Refer to the exhibit.
Which TMSH command generated this output?
- A. tmsh show /sys sync-status
- B. tmsh show /cm sync status
- C. tmsh list /cm sync-status
- D. tmsh list /sys sync-status
Answer: B
NEW QUESTION # 84
A BIG-IP Administrator discovers malicious brute-force attempts to access the BIG-IP device on the management interface via SSH. The BIG-IP Administrator needs to restrict SSH access to the management interface.
Where should this be accomplished?
- A. Network > Self IPs
- B. System > Platform
- C. System > Configuration
- D. Network > Interfaces
Answer: B
NEW QUESTION # 85
A BIG-IP Administrator reviews the Plane CPU Usage performance chart and discovers a high percentage of Control Plane utilization.
Which type of traffic does this indicate a higher usage of?
- A. Application
- B. Accelerated ,
- C. Administrative
- D. Tunnel
Answer: C
NEW QUESTION # 86
A virtual server is listening at 10.10.1.100:80 and has the following
iRule associated with it: when HTTP_REQUEST { if {[HTTP::uri] ends_with "txt" } { pool pool1 } elseif {[HTTP::uri] ends_with "php" } { pool pool2 } If a user connects to http://10.10.1.100/foo.html, which pool will receive the request.
- A. pool2
- B. None. The request will be dropped.
- C. Unknown. The pool cannot be determined from the information provided.
- D. pool1
Answer: C
NEW QUESTION # 87
A set of servers is used for an FTP application as well as an HTTP website via separate BIG-IP Pools. The server support team reports that some servers are receiving a lot more traffic than others.
Which Load Balancing Method should the BIG-IP Administrator apply to even out the connection count?
- A. Ratio (Member)
- B. Ratio (Node)
- C. Least Connections (Member)
- D. Least Connections (Node)
Answer: D
Explanation:
The connection is required to be balanced, and the unit is the server and the application port is the unit, so it is node.
NEW QUESTION # 88
A BIG-IP Administrator uses backend servers to host multiple services per server. There are multiple virtual servers and pools defined, referencing the same backend servers.
Which load balancing algorithm is most appropriate to have an equal number of connections on each backend server?
- A. Predictive (node)
- B. Predictive (member)
- C. Least Connections (node)
- D. Least Connections (member)
Answer: C
Explanation:
The same set of servers provides multiple services, that is, using different ports to provide different services at the same time. The stem requirement is based on server connection balancing, not server + port, so it is node.
NEW QUESTION # 89
A BIG-IP Administrator sees the following error message in /var/log/ltm diskmonitor: *******; Disk partition shared has less than 30$ free Which section of the Configuration Utility should the BIG-IP Administrator access to investigate this error message?
- A. System > File Management
- B. Statistics > Analytics
- C. System > Disk Management
- D. Statistics > Module Statistics > System
Answer: C
NEW QUESTION # 90
A BIG-IP Administrator needs to restore an encrypted UCS archive from the command line using the TMSH utility.
Which TMSH command should the BIG-IP Administrator use to accomplish this?
- A. load/sys config file <filepath> passphrase <password>
- B. load/sys ucs <filepath> passphrase <password>
- C. load/sys ucs <filepath> no-license
- D. load/sys config file <filepath>
Answer: B
NEW QUESTION # 91
A BIG-IP Administrator receives an RMA replacement for a failed F5 device. The BIG-IP Administrator tries to restore a UCS taken from the previous device, but the restore fails. The following error appears inthe/var/log/itm.
mcpd [****J: ******;0; License is not operational (expired or digital signature does not match contents.) What should the BIG-IP Administrator do to avoid this error?
- A. Revoke the license prior to restoring
- B. Reactivate the license on the new device using the manual activation method
- C. Use the appropriate tmsh command with the no-license option
- D. Remove the license information from the UCS archive
Answer: C
NEW QUESTION # 92
The BIG-IP Administrator needs to perform a BIG-IP device upgrade to the latest version of TMOS. Where can the administrator obtain F5 documentation on upgrade requirements?
- A. Bug Tracker
- B. AskF5
- C. DevCentral
- D. iHealth
Answer: B
NEW QUESTION # 93
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If a client were to initiate traffic to the NAT address, what changes, if any, would take place when the BIGElIP processes such packets.
- A. The destination address would not change, but the source address would be translated to the origin address.
- B. The source address would not change, but the destination address would be translated to the origin address.
- C. The source address would not change, but the destination address would be translated to the NAT's address.
- D. The destination address would not change, but the source address would be translated to the NAT's address.
Answer: B
NEW QUESTION # 94
When configuring a pool member's monitor, which three association options are available? (Choose three.)
- A. do not assign any monitor to the specific member
- B. assign a monitor to the specific member
- C. inherit the node's monitor
- D. configure a default monitor
- E. inherit the pool's monitor
Answer: A,B,E
NEW QUESTION # 95
Which cookie persistence method requires the fewest configuration changes on the web servers to be implemented correctly.
- A. session
- B. insert
- C. rewrite
- D. passive
Answer: B
NEW QUESTION # 96
A custom HTTP monitor is failing to a pool member 10.10.3.75:8080 that serves up www.example.com.
A ping works to the pool member address.
The SEND string that the monitor is using is: GET/HTTP/l.l/r/n/Host.www.example.com/r/n/Connection Close/r/n/r/n Which CLI tool syntax will show that the web server returns the correct HTTP response?
- A. tracepath 10.10.3.75:8080 GET /index
- B. curlhttp://10.10.10.3.75:8080/www.example.com/index.html
- C. curl-header 'Host:www.example.com'
http://10.10.3.75:8080/ - D. tracepath 'http://www.example.com:80
Answer: C
NEW QUESTION # 97
Which two statements are true about SNATs. (Choose two.)
- A. SNATs are enabled on all VLANs, by default.
- B. SNAT's are enabled only on the VLAN where origin traffic arrives, by default
- C. SNATs can be configured within a Profile definition.
- D. SNATs can be configured within a Virtual Server definition.
Answer: A,D
NEW QUESTION # 98
What is the purpose of provisioning.
- A. Provisioning allows modules that are not licensed to be fully tested.
- B. Provisioning allows modules that are licensed be granted appropriate resource levels.
- C. Provisioning allows the administrator to see what modules are licensed, but no user action is ever required.
- D. Provisioning allows the administrator to activate
modules
in nonElstandard combinations.
Answer: B
NEW QUESTION # 99
......
Use Real F5 Achieve the 201 Dumps - 100% Exam Passing Guarantee: https://www.updatedumps.com/F5/201-updated-exam-dumps.html
Verified 201 Q&As - Pass Guarantee 201 Exam Dumps: https://drive.google.com/open?id=1MHIp7evIryNp5FN1fjK7wb25tEeLcfd8